BS ISO 5611-8:2015 pdf free.Cartridges, type A, for indexable inserts Part 8: Style S.
This part of Iso 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style S, i.e. with cutting edge angle Kr = 450 for end cutting.
Cartridges are intended to be used with indexable inserts made of hard metal, ceramic, or other cutting materials and are primarily mounted to be used for internal turning of operations.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1832, Indexable inserts for cutting tools — Designation
ISO 5608, Turning and copying tool holders and cart ridges for indexable inserts — Designation
ISO 5611-1, Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination
of dimensions
3 Dimensions
Cartridges type A need not comply with the pictorial representation, only the dimensions given shall be observed.
For determination of dimensions h1,f and 1, see ISO 5611-1. For explanation of the designation code for cartridges, see ISO 5608.
4 Designation
A cartridge in accordance with this part of ISO 5611 shall be designated by the following:
a) “Cartridge”;
b) reference of this part of ISO 5611, i.e. ISO 5611-8;
c) ltter symbol identifying the method of holding the insert, in accordance with ISO 5608;
d) letter symbol identifying insert shape, in accordance with ISO 1832;
e) letter symbol identifying cartridge style, in accordance with ISO 5608;
f) letter symbol identifying insert normal clearance, in accordance with ISO 1832;
g) letter symbol identifying hand of cartridge, in accordance with ISO 5608;
h) number symbol identifying tool height (shank height of cartridges and height of cutting edge), in
accordance with ISO 5608;
i) number symbol identifying tool holder shank width or, for cartridges, letter C fllowed by a letter symbol identifying the cartridge type, in accordance with ISO 5608;
i) letter symbol identifying tool length, in accordance with ISO 5608;
k) number symbol identifying indexable insert size, in accordance with ISO 1832.
EXAMPLE Cartridge with screw clamping through hole (S) triangular indexable insert shape (T), cartridge style S (S), for the insert normal clearance 7° (C), right hand cartridge (R), with height h1 = 12 mm (12), cartridge Type A (CA), length l1 = 47 mm (-), edge length l4= 16,5 mm (16) is designated as follows: Cartridge IS0 5611-8- STSCR 12CA- 16
5 Material
Steel with a tensile strength of at least 1 200 N/mm2.BS ISO 5611-8 pdf free download.