IEEE 404-2012 pdf free.lEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV.
Joints that connect more than two cables or connect cables with two different conductor sizes are not covered by this standard. However, manufacturers and users are encouraged to use appropriate parts of this standard to evaluate these joints.
2. Normative references
The following referenced documents are indispensable for the application of this document Lii… they must be understood and used. so each referenced document is cited in ht and its rdationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies.
AEIC CS1, Specification for Impregnated Paper-Insulated Metallic-Sheathed Cable, Solid Type.
AEIC CS2, Specification for Impregnated Paper and Laminated Paper Polypropylene Insulated Cable, High Pressure Pipe Type.
AEIC CS3, Specification for Impregnated-Paper-Insulated Metallic Sheathed Cable, Low Pressure Gas- Filled Type.
AEIC CS4, Specification for Impregnated-Paper-Insulated Low and Medium PressureSelf-Containoi Liquid Filled Cable.
AEIC CS8, Specification for Extruded Dielectric Shielded Power Cables Rated 5 Through 46 kV.
AEIC CS9 Specification for Extruded Insulation Power Cables and Their Acessories Rated Above 46 kV Through 345 kV ac
ANSI C119.4, Electric Connectors- Connectors to for Use Between Aluminum-to-Aluminum or Aluminum- to-Copper Conductors Bare Overhead Conneetors.
ASTM D149-97a， Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies.
ASTM D412-98, Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers.
ASTM D991-89, Standard Test Method for Rubber Property-Volume Resistivity of Electrically Conductive and Antistatic Products.
ASTM D4325-08 02, Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes.
ASTM D4496-04, Standard Test Method for DC Resistance or Conductance of Moderately Conductive Materials.
ICEA P-32-382, Short-Circuit Characteristics of Insulated Cable.
ICEA P-45-482, Short-Circuit Performance of Metallic-shields and Sheaths on Insulated Cable.
IEEE Std 4TM, IEEE Standard Techniques for High-Voltage Testing.IEEE 404 pdf download.