ISO 17324-2014 pdf free.Rubber hoses for automotive turbochargers一Specification.
ISO 17324 specifies requirements of rubber hoses used in the automotive turbocharger system to connect turbocharger, intercooler, and internal combustion engine at the working temperatures from -40°C to +250°C and the working pressures from -0,01MPa(-0,1bar) to 0,5MPa(5bar). Hoses covered by this International Standard may be straight or shaped.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 188, Rubber, vulcanized or thermoplastic一Accelerated ageing and heat resistance tests
ISO 812, Rubber, vulcanized or thermoplastic一Determination of low-temperature brittleness
ISO 1402, Rubber and plastics hoses and hose assemblies一Hydrostatic testing
ISO 1431-1, Rubber, vulcanized or thermoplastic一Resistance to ozone cracking一Part 1: Static and dynamic strain testing
ISO 1629, Rubber and latices一Nomenclature
ISO 1817, Rubber; vulcanized or thermoplastic一Determination of the effect of liquids
IS0 4671, Rubber and plastics hoses and hose assemblies一Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 7233:2006, Rubber and plastics hoses and hose assemblies一Determination of resistance to vacuum
ISO 8033, Rubber and plastics hoses一Determination of adhesion between components
ISO 8330, Rubber and plastics hoses and hose assemblies一Vocabulary
ISO 8331, Rubber and plastics hoses and hose assemblies 一Guidelines for selection, storage, use and maintenance
ISO 28702, Rubber and plastics hoses and tubing一Textile-reinforced types一Sub-ambient temperature crush test
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 8330 and the abbreviated terms given in ISO 1629 apply.
4 Classification
4.1 Types and classes
The hoses are classified into three types as per the intended operating conditions.
一Type A: hose for connecting air filter and turbocharger, to transfer filtered atmospheric air. Working temperature from -40°C to +100°C, and vacuum pressure low to -0,01MPa(-0,bar).
一Type B: hose for connecting turbocharger and intercooler, to transfer the pressurized and heated air. Working temperature from -40°C to +250*C.
Type B is subdivided into three subtypes as per working temperature and further classified into classes as per maximum working pressures. The subtypes and classes are shown in Table 1.ISO 17324 pdf free download.