ISO 18600-2015 pdf free.Textile machinery and accessories – Web roller cards – Terms and definitions.
ISO 18600 defines terms of the card with a web forming method using staple fibres for non-woven machinery.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 Basic terms
2.1.1 web roller card machine for mechanical web formation with at least two working rllers for opening fibre tufts and for producing unconsolidated textile fabric [SOURCE: web (2.3.3)]
2.1.2 work flow direction direction of fibre flow through machine (material flow)
2.1.3 entry side side on which the fibre flow enters the machine
2.1.4 delivery side side on which the fibre flow runs out the machine
2.1.5 right side side of the machine which, when looking in the direction of the fibre flow, is situated on the right
2.1.6 left side  side of the machine which, when looking in the direction of the fibre flow, is situated on the left
2.2.1 cylinder width overall width of roller body when designed with flanges including these flanges
Note 1 to entry: See Figure 1.
2.2.2 width of carding wire W2 width decisive for calculating carding wire equal to the cylinder width less possible flanges
Note 1 to entry: See Figure 1.
2.2.3 working width theoretically utilizable cover width of fibre material on the roller
Note 1 to entry: See Figure 1.
2.2.4 bearing centre distance Wa distance between two bearing centres
Note 1 to entry: See Figure 1.
2.4.1.1 feed plate device for clamping fibre material prior to first opening of fibre material in the web-forming machine
2.4.1.2 feed roller one or several rollers for feeding fibre material to the web-forming machine
2.4.1.3 taker-in roller roller between feed roller (2.4.1.2) and breast cylinder (2.4.2.2) for first opening of fibre material in the web-forming machine
2.4.2 Breast unit
2.4.2.1 breast unit breast cylinder (2.4.2.2) with worker (2.4.2.3) and stripper rollers (2.4.2.4) for further opening of fibre material
Note 1 to entry: See Figure 4.
2.4.2.2 breast cylinder main cylinder of breast unit in front of main cylinder (2.4.4.1)
2.4.2.3 worker roller roller which, due to its low circumferent ial speed compared to that of the breast cylinder (2.4.2.2) and
its reverse position of teeth, partly takes up the fibre material, opens it and feeds it indirectly to the
breast cylinder via the stripper roller (2.4.2.4)
2.4.2.4 stripper roller roller which removes fibre material adhered to the worker roller (2.4.2.3) and feeds it back to the breast cylinder (2.4.2.2)
2.4.3 Transfer unit
2.4.3.1 transfer unit roller or roller combination between breast unit (2.4.2.1) and main cylinder unit (2.4.4.1) for transferring fibre material to the main cylinder (2.4.4.2)
Note 1 to entry: See Figure 5.ISO 18600 pdf free download.