ISO 4014-2011 pdf free download.Hexagon head bolts – Product grades A andI B.
ISO 4014 specifies the characteristics of hexagon head bolts with threads from Ml ,6 up to
and including M64, of product grade A for threads Ml ,6 to M24 and nominal lengths up to and including 1 Od or
150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 1 Od or
150 mm. whichever is the shorter.
If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1. ISO 4753 and ISO 4759-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions ISO 724, Iso general-purpose metric screw threads — Basic dimensions
ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws arid studs with specified property classes — Coarse thread and fme pitch thread
ISO 965-1, Iso general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data ISO 3269. Fasteners — Acceptance inspection
ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
ISO 4017, Hexagon head screws — Product grades A and B
ISO 4042, Fasteners — Electroplated coatings
ISO 4753. Fasteners — Ends of parts with external ISO metric thread
ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, Band C
ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 8839. Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
ISO 8992. Fasteners — General requirements for bolts, screws, studs and nuts
ISO 10583, Fasteners — Non-electrolytically applied zinc flake coatings.ISO 4014 pdf download.