IEC 62613-1-2019 pdf free.Plugs,socket-outlets and ship couplers for high-voltag shore connection (HVSc) systems Part 1: General requirements.
4.1General requirements
Accessories shall be supplied with all the necessary instructions from the manufacturer, forexample on installation, assembling,wiring,commissioning,inspection,preventivemaintenance,replacement of consumable parts,etc.,including the levels of ability of thepersonnel to perform such operations.
Accessories shall be so designed and constructed that in normal use their performance isreliable and without danger to the user or the surroundings.
Accessories constructed in accordance with this document shall be suitable for theenvironment conditions in the space(s) where they are intended to operate.Accessorieslocated on ships shall comply with the applicable part(s) of lEC 60092.
Unless otherwise stated, the normal use environment in which the accessories complying withthis document are normally used is pollution degree 3 according to lEC 60664-1.
Accessories shall comply with the applicable requirements of lEC 60502-4.
Accessories shall be wired,installed,commissioned,maintained and used by electricallyinstructed or skilled personnel.
HVSC systems do not allow in-line connections unless a specific piece of equipement madefor that purpose is used. lt shall not be possible to connect a plug into a ship connector(see 8.4).
4.2General notes on tests
4.2.1 Tests according to this document are type tests. lf a part of an accessory haspreviously passed tests for a given degree of severity,the relevant type tests shall not berepeated if the severity is not greater.
4.2.2Unless otherwise specified,the samples are tested as delivered and under normalconditions of use,at an ambient temperature of (20 ±5)°C; the tests are made at rated frequency.
4.2.3 Unless otherwise specified, the tests are carried out in the order of the clauses orsubclauses of this document.
4.2.4 Three samples are subjected to all the tests. For the tests of 11.1.4,for the tests of19.6 and 19.7, and for the tests of Clause 27, a new set of three samples can be used, ifnecessary.
4.2.5 Accessories are deemed to comply with this document if no sample fails in thecomplete series of appropriate tests. If one sample fails in a test,that test and thosepreceding which can have influenced the test result are repeated on another set of threesamples, all of which shall then pass the repeated tests.IEC 62613-1 pdf download.